DIY Appliance Repair Tips

Wait! Before you decide to hire an appliance repair in Fort Lee for help, you should be able to keep your appliances running like new with the help of some of the troubleshooting tips below.

1. Smelly Washing Machine

A gross odor in a washer can defeat the entire purpose of the appliance! If you’re in the process of attempting to wash your clothes so that they’re fresh and clean, but your washer isn’t cooperating, run an cycle with no clothes/laundry in hot water with two cups of white vinegar and half of a cup of baking soda to eliminate the unpleasant smell. This issue frequently occurs in front-loading washers. To prevent future odors, prop the door open between cycles so it will dry out.

2. Inefficient Refrigerant

A warm refrigerator is not a welcome sign. A warm refrigerator will not keep drinks cold, and the food inside could also be in danger of rotting! In several cases, your refrigerator won’t need repair; instead interior might just need to be cleaned out. Or the coils on the back panel of the unit are overdue for cleaning.

Unplug the appliance and move it away from the wall before cleaning the coils. If you don’t see instant cooling improvement, it is a good idea to call a professional appliance repair technician in Fort Lee for troubleshooting.

3. Clicking Igniter on Stove

If the igniter on a gas stove clicks and clicks and the burner won’t light, check to be sure the burner lid is tightened and properly aligned. You might possibly experience this problem if you have had a recent boil over or spill on the top of your stove.

If that’s not the case, the cause is probably a dirty igniter. To clean , take off the burner cap and clear off any loose debris. You can use a pin to scrape debris from the grooves of the igniter. If that does not resolve the issue, it’s smart not to disassemble a lighter for someone without right training; call on a professional appliance repairman to investigate the issue.

4. Broken Garbage Disposal

A sink’s garbage disposal comes with self-protection with its own overload trip switch. If it gets filled up, overheats, is left on for too much time, or has some other issue, the disposal might simply have to be reset rather than repaired. Be sure the switch is turned OFF. Then, find the button on the disposal unit under the kitchen sink and then press the switch. If the button doesn’t stay pushed in, wait a few minutes and then attempt it again. Now, turn on the water and turn the switch on.

If the disposal in the sink is clogged with food and you only hear a humming noise and not the grinding of food, you might need to twist the blades using a hex key tool to eliminate the jam. Then, push in the reset button to get the garbage disposal running again. If the tips above don’t get the appliance working like normal, do not succumb to the urge to push your arms down into the disposal to solve the issue. Be smart and schedule an appointment with a professional appliance service in Fort Lee.

5. No Power from Outlet

In the kitchen or bathroom, the outlets must be equipped with GFCI switches in order to protect people against harm in wet areas. If a GFCI electrical outlet isn’t generating power, press the red reset button to see if that will restore juice.

If it does not, or if you are trying a typical outlet, be certain that a breaker hasn’t tripped in the breaker box. If you are uncertain if a circuit breaker is tripped, switch it so it is in the OFF position and then flip it back to the ON position. Please remember, safety near wiring is a must. If you have any doubts, call a professional technician.

6. Wobbling Washing Machine

A shaking washer will produce a loud racket and isn’t a good way to get wash clothing. If your washing machine is suddenly knocking, the washer could be broken. To repair this problem, turn the legs of the machine to lift or lower each of the corners until it is level. One other likely scenario is the washing machine is not balanced. Crack open the top and move around the shirts and pants so they’re more dispersed in the drum of the appliance.

Doing this will help your washing machine to not need to work as hard. If you try to rearrange the laundry a couple of times without luck, don’t ignore the issue. You may have a loose motor or drum mount to repair, which is easy enough for a professional to repair. But if you continue to use your washing machine when it has this issue might destroy other components and cause a more costly repair later.

Call for Help

If none of these quick fixes are able to fix your broken appliance, you can schedule service from Mason Appliance Repair!

OTHER RESOURCES:

Appliance Repair Cost
Appliance Safety
Emergency Appliance Repair
Repair or Replace Appliances
Refrigerator Parts

CLICK-TO-CALL